Topfield TF 3000
FTA Satellite Receiver Programming
Before attempting to program new channels it may be necessary to make adjustments to the dish and/or LNB to obtain a strong signal that reflects good signal and quality levels. Poor signal quality will affect the ability to program and properly receive additional channels.
Adding New Transponder Information
On Satellite AMC-4
1. Using the remote control, press the Menu key
2. Go to INSTALLATION, press the OK key
2. Go to CHANNEL SEARCH, press the OK key
3. Go to TP FREQUENCY, enter the frequency ( i.e.11983 for ATN / LifeTalk )
4. Go to SYMBOL RATE, enter the symbol rate ( i.e. 5900 for ATN / LifeTalk )
5. Verify that the POLARIZATION is correct ( Horizontal for ATN / LifeTalk )
6. Go to START SEARCH, press OK
7. Upon completion of the scan the system will prompt for saving the changes, press OK
8. Press EXIT to view the new channels
Repeat the above steps to program additional channels